Reethu Nadikatla, Author at Assured Software Solutions

Understanding the BitLocker Recovery Problem in July’s Windows 11 Update

Microsoft rolled out a big Windows 11 update in July 2024. This update aimed to boost system security and speed. But it caused unforeseen problems with BitLocker, the built-in tool that encrypts data by securing entire disk volumes. If you’ve seen July’s Windows 11 Update cause BitLocker Recovery messages after the latest update, you’re not the only one. This article looks into the causes, effects, and fixes for this problem.

What Is BitLocker and Why Does It Matter?

BitLocker, a feature in Windows 11, encrypts your entire disk drive to protect your data. This security tool keeps your files safe from unauthorized access if someone steals your device or you lose it. BitLocker might start recovery mode to stop unauthorized access when it notices changes to your system’s setup or hardware.

The July 2024 Windows 11 Update and BitLocker

The July 2024 Windows 11 update aims to boost system stability, add new features, and fix security holes. However, it has unexpectedly impacted how BitLocker works. Some users now face surprise BitLocker recovery prompts after they install this update. This happens because the update changes system settings or hardware setups in ways that make BitLocker think there might be a threat.

Reasons for the BitLocker Recovery Problem

A few things could lead to BitLocker recovery prompts showing up after the update:

System Configuration Changes: The update might have changed system configurations, like BIOS/UEFI settings, that BitLocker uses to check if the operating system is safe.
Hardware Changes: When the update tweaks hardware compatibility or drivers, BitLocker could see these changes as a possible threat kicking off recovery mode.
Software Conflicts: The update may clash with existing security software or system tools, which could mess with how BitLocker works.
Update Installation Errors: Sometimes, mistakes during the update process can damage BitLocker’s setup causing it to ask for recovery.

How to Fix the BitLocker Recovery Problem

Are you seeing BitLocker recovery prompts after installing the July 2024 update? Here’s how to fix this problem:

Enter Recovery Key:

When the system asks, type in your BitLocker recovery key. You save this key in a safe place like a USB drive or a Microsoft account. If you can’t find it, you might need to get it back from your Microsoft account or ask your IT support team.

Check System Configuration:

Make sure your system settings, like BIOS/UEFI setups, haven’t changed. If they have, set them back to how they were before or look at your system maker’s instructions.

Update Drivers and Firmware:

Be sure all device drivers and firmware are current. Old drivers can sometimes clash with BitLocker and cause problems.

Check Windows Update Status:

See if Windows 11 has any updates or patches waiting. Microsoft might roll out more updates to fix problems the July 2024 update caused.

Set Up BitLocker Again:

If you still have trouble, you might need to pause and then start BitLocker encryption again. To do this, go to Control Panel > System and Security > BitLocker Drive Encryption. Choose “Suspend Protection.” Then, pick “Resume Protection.”

Conclusion:

If you can’t solve the problem yourself, think about asking Microsoft Support or a skilled IT expert for help.Our experts can help you out. Just chat with them and they’ll sort it out for you. If you want to know how to get support, you can ask the Tech who’s online right now.

Click here to talk to our tech expert and fix your problem. Chat with us for more help with tech stuff.

Fixing Error Code 0x80070643 During Windows Updates

Having trouble updating Windows? Running into error code 0x80070643? Don’t worry, you’re not the only one. This error means there’s a problem with installing or updating often because of messed up system files or issues with other programs you’ve got installed. Here’s a complete guide to help you fix this problem and get your Windows updates working again.

What Error Code 0x80070643 Means

You might see error code 0x80070643 when:

Windows Update Fails: Your system runs into a problem when it tries to install updates.
Microsoft Defender Update Issue: The error might show up when Microsoft Defender is updating pointing to problems with virus definition updates.

How to Fix Error Code 0x80070643

Method 1: Restart Your Computer

A quick restart can often solve temporary Windows Update hiccups. Give your computer a reboot and try to update again to check if the error sticks around.

Method 2: Run Windows Update Troubleshooter

Windows comes with built-in tools to spot and fix common update issues. Here’s how you can use the Windows Update Troubleshooter:

Open Settings: Hit the Start button then pick the gear icon for Settings.
Go to Update & Security: Click Update & Security then Troubleshoot.
Run Troubleshooter: Look for Windows Update, click it then hit Run the troubleshooter.

Do what the screen tells you and let the troubleshooter find and fix any problems it sees.

Method 3: Clear Windows Update Cache

A messed up Windows Update cache can make updates fail too. Cleaning out the cache might solve the problem:

Stop Windows Update Service:
- Hit Win + R to bring up the Run box.
- Enter services.msc and hit Enter.
- Find Windows Update service right-click it, and pick Stop.
Get rid of SoftwareDistribution Folder:
- Go to C:\Windows\SoftwareDistribution.
- Trash everything in this folder (you might need admin rights).
Get Windows Update Service going again:
- Head back to the Services window right-click Windows Update service, and choose Start.

Method 4: Look for Third-Party Antivirus Getting in the Way

Third-party antivirus programs can mess with Windows updates sometimes. Turn off any antivirus software you’ve installed for a bit and try to update Windows again.

Method 5: Do a Clean Boot

A clean boot kicks off Windows with just the basic drivers and startup stuff. This helps get rid of software problems. Here’s how to do a clean boot:

Launch System Configuration:
- Hit Win + R to get the Run box.
- Enter msconfig and smash Enter.
- Once in System Configuration, head to the Services tab.
Turn off Non-Microsoft Services:
- Tick the box that reads “Hide all Microsoft services.”
- Hit “Disable all” to shut down all non-Microsoft services.
Stop Startup Programs:
- Go to the Startup tab.
- Click to “Open Task Manager.”
- One by one, switch off all startup items.
Reboot Your PC:

Turn off your computer and start it up again after you’ve stopped the services and startup stuff.
See if you can get Windows to update now.

Method 6: Update Microsoft Defender by Hand

If you run into trouble when trying to update Microsoft Defender:

Get the Newest Definitions:

Go to the Microsoft Defender Updates website.

Download the most recent virus and spyware definition updates for Microsoft Defender.

Put the Updates in Place:

Open the file you downloaded to install the updates yourself.

Conclusion:

Windows update Error Code 0x80070643 can be frustrating, but with a systematic approach, users can troubleshoot and resolve the issue effectively. At last, if you are still not able to resolve error code 0x80070643 . We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for paid support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Troubleshooting Windows 11 KB5040442 Update Installation Issues

Windows updates are super important to keep your system safe and working well. But sometimes, things go wrong when you’re trying to install them, like when the KB5040442 update won’t install on Windows 11. It’s annoying when this happens. Here’s a step-by-step guide to help you fix these problems:

Why Updates Might Not Install:

Not Enough Space on Your Hard Drive:

- Make sure you’ve got plenty of room on your main drive. Windows needs a lot of space to download and set up new updates.

Messed Up Update Files:

- Sometimes, the files you download for updates get scrambled. This can stop them from installing .

Other Programs Getting in the Way:

- Stuff like antivirus software can mess with update. Turning them off for a bit might help you figure out what’s wrong.

Internet Problems:

- If your connection is bad or keeps cutting out while you’re downloading, it can make the update fail.

How to Fix Installation Problems:

Turn off and on your computer:

Sometimes just restarting can fix little problems that stop updates from working.

Look at your free space:

If you’re running low on space, make some room. You can use Disk Cleanup or Storage Sense to get rid of files you don’t need anymore.

Try the Windows Update fixer:

Windows has a tool to find and fix update problems on its own.

Go to Settings > Update & Security > Troubleshoot > More troubleshooters > Windows Update > Start the fixer.

Start over with Windows Update parts:

Resetting Windows Update parts can fix update problems sometimes.
Start Command Prompt as Admin and type these commands:
net stop wuauserv net stop cryptSvc net stop bits net stop msiserver Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old Ren C:\Windows\System32\catroot2 Catroot2.old net start wuauserv net start cryptSvc net start bits net start msiserver

Update Drivers and Software:

Keep your device drivers and key software current. Old drivers can stop updates from working right at times.

Conclusion:

Our experts can help you out. Just chat with them and they’ll sort it out for you. If you want to know how to get support, you can ask the Tech who’s online right now.

Click here to talk to our tech expert and fix your problem. Chat with us for more help with tech stuff.

Troubleshoot this Windows 10/11 BSOD Stuck at Recovery Due to CrowdStrike

Are you Getting a Blue Screen of Death (BSOD) on Windows 10/11 sucks when it gets stuck trying to solve itself because of the CrowdStrike. CrowdStrike is one of the security thing that’s supposed to keep your system safe from bad threats, but sometimes it doesn’t play nice with the Windows and causes a problems like BSOD loops. If you’re dealing with this headache issue Windows 10/11 BSOD Stuck at Recovery Due to CrowdStrike here’s a step-by-step guide to figure out what’s wrong and fix it.

What’s Going On?

When Windows gets stuck in a BSOD loop during recovery, it means there’s a problem with a driver or some kind of conflict. CrowdStrike, like other security programs, works with parts of your system to keep it safe. Sometimes, updates or conflicts can mess up how your system works causing the BSOD to happen.

Step to solve this Error Message Windows 10/11 BSOD Stuck at Recovery Due to CrowdStrike

This article gives you step by step solutions to fix this Error message Windows 10/11 BSOD Stuck at Recovery Due to CrowdStrike

1. Start up in Safe Mode

Windows 10:

Reboot your PC and hit F8 many times before you see the Windows logo.
Choose the Safe Mode from the list of Advanced Boot Options.

Windows 11:

Press Shift and click to Restart on the login screen or Start menu.
Go to the Troubleshoot > Advanced options > Startup Settings > Restart. After the options shown up, select the Safe Mode.

2. Get rid of CrowdStrike

After you’re in Safe Mode:

Hit Win + R, type in appwiz.cpl, and press Enter to open up Programs and Features.
Find CrowdStrike in the list right-click it, and pick Uninstall.
Go through the uninstall steps to get rid of the software .

3. Make Driver Changes

After you get rid of CrowdStrike, you need to fix or go back to older drivers that might not work right:

Click the Start button with your right mouse button then pick Device Manager.
Open up the different groups (like Display adapters, Network adapters)
Use your right mouse button on each device to choose Update driver or Roll back driver if a new one messed things up.

4.Give System Restore

If your screen keeps turning blue after removing CrowdStrike, you can go back to when your PC was working fine using System Restore:

Go to the Start menu, type “Create a restore point”, and pick the matching option.
Click on System Restore and follow the steps to choose a restore point from before you installed CrowdStrike.

Reinstall It or Get Help

If these steps don’t solve the issue, think about reinstalling Windows or reaching out to CrowdStrike support for assistance. They might have a new updates or fix to make the software work better with your computer.

Conclusion: If you’re still stuck with this Error Message Windows 10 & Windows 11 BSOD Stuck at Recovery Due to CrowdStrike, don’t worry. Our experts can help you out. Just chat with them and they’ll sort it out for you. If you want to know how to get support, you can ask the Tech who’s online right now.

Click here to talk to our tech expert and fix your problem. Chat with us for more help with tec

Office Installation Error Code 1605: Why It Happens and How to Fix It

When you get Office Error Code 1605, it’s a pain if you’re doing something important. This error happens when there are problems installing or uninstalling Microsoft Office programs. Knowing why it happens and how to fix it can help you get back to work .

Why Office Error Code 1605 Happens:

Installation or Uninstallation Not Finished: If a past installation or uninstallation of Microsoft Office didn’t finish right, it can leave behind files or registry stuff that cause Error Code 1605.

Messed Up Registry Entries: Changes in the Windows registry from software installs or updates can sometimes lead to errors when installing or uninstalling Office programs.

Other Software Getting in the Way: Antivirus programs, firewalls, or other security software might mess with Office installs causing errors like 1605.

File Permission Problems: Not having enough permissions on certain files or folders needed for the install or uninstall process can stop Office from finishing the job.

How to Fix Office Error Code 1605:

Use Microsoft’s Fix It Tool:

Microsoft has a Fix It tool that’s made to automatically find and fix problems that stop Microsoft Office programs from being installed or removed . This tool can often fix Error Code 1605 quickly by dealing with common issues .

Do a Clean Boot:

A clean boot starts Windows with just the basics, which can help figure out if another app is causing the install issue. To do a clean boot:

Press Windows + R to open Run.
Type msconfig and hit Enter.
Go to Services, check Hide all Microsoft services then click Disable all.
Go to Startup and click Open Task Manager. Turn off all startup items.
Close Task Manager and click OK on the System Configuration window.
Start your computer again and try to reinstall Office.

Manually Get Rid of Old Office Installs:

If there are leftovers from old Office installs causing problems remove them by deleting Office-related folders and registry keys. Be careful when messing with the registry, as wrong changes can cause serious problems with your computer.

Check and Fix Disk Permissions:

Use Windows’ built-in tools to check and fix disk permissions. Wrong file permissions can stop Office from installing or uninstalling . Right-click on your hard drive in File Explorer, go to Properties -> Tools -> Check.

Install Office in Safe Mode:

Sometimes installing Office in Safe Mode can get around issues caused by other software getting in the way. To do this:

Start your computer again.
Hold the Ctrl key and click on the Office app to open it.
Click Yes when asked to start in Safe Mode.

Conclusion:

Finally, if you are still not able to resolve this Installation Error code 1605 We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Resolving Microsoft Office Installation Error Code 30015-26 (3)

Setting up software can be a real pain when you run into errors while trying to install important programs or updates. One error that pops up sometimes is Error Code 30015-26 (3). This article will help you get what this error means and how to fix it.

What Error Code 30015-26 (3) Means?

Error Code 30015-26 (3) shows up when something is going wrong at the same time as putting in or updating Microsoft Office. This errors can occur for a many of reasons, like:

Network Issues: Bad internet or wrong network setup can reduce to rubble downloads or set up.

Old Installation Stuff: Leftover files from trying to deploy before might conflict with what you are doing now.

Corrupted System Files: System documents important for set up can be corrupted, preventing the installation from finishing correctly.

How to Fix Error Code 30015-26 (3)?

To sort out this mistake, you want to attempt some things. Do these steps one at a time to discover and attach the problem:

Method 1: Turn Your Computer Off and On Then Try Installing Again

A short restart can every so often repair little issues which are getting inside the way of putting in. Here’s what to do:

Make certain you keep whatever you are working on and shut down all of your programs.
Give your computer a short reboot.
Once it is again up, try to placed Office to your laptop or replace it once more.

Method 2: Make Sure You’re Online

Check if your net is working okay. Here’s how you may do this:

Go to a internet site to see if you’re linked.
If you are the use of Wi-Fi, plug in an Ethernet cable to look if that enables.
If nothing else works, flip your router off and on again.

Method 3: Get Rid of Old Installation Stuff

Cleaning up leftover files from while you tried to install before can restore problems. Here’s what to do:

Hit the Windows key and R on the same time to get the Run box to pop up.
Type in %ProgramData% and hit Enter.
Get rid of any folders related to Microsoft Office you see in the ProgramData folder.

Reboot your computer and try to install the program again.
Do this:

Hit the Windows key and R at the same time to bring up the Run box.
Type in %ProgramData% and hit Enter.
Get rid of any folders related to Microsoft Office you see in the ProgramData folder.
Reboot your computer and try installing again.

Method 4: Use the Office Repair Tool

Microsoft has a built-in tool to fix problems that can find and solve lots of common installation issues . Here’s how you can use it:

Start up Control Panel and head to Programs > Programs and Features.
Find Microsoft Office in the list of stuff you’ve installed right-click on it, and pick Change.
Go for Quick Repair first. If that doesn’t fix things, try Online Repair to make sure all the Office bits are fixed up good.

Method 5: Turn off Antivirus/Firewall for a bit

Sometimes, your antivirus or firewall can mess with installing stuff. Try turning them off for a sec and then install:

Open up your antivirus or firewall program.
Switch off real-time protection or the firewall for a little while.
Try to install or update Microsoft Office again.

Method 6: Run a System File Checker (SFC) Scan

If the problem keeps happening, messed up system files might be causing the error. To fix them, do an SFC scan:

Open Command Prompt as an admin.
Type sfc /scannow and hit Enter.
Let the scan finish (it might take a while).
Restart your computer and try to install again.

Conclusion:

Finally, if you are still not able to resolve this Troubleshooting Error Code 30015-26(3). We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Installation Error Code 0x8007267C: What It Means and How to Resolve It

Running into Error Code 0x8007267C when you’re trying to install something can be a real pain. But don’t worry! If you tackle the problem step by step, you can usually fix it and get your software or updates installed without too much trouble. This article will explain what this error is all about why it might be happening, and give you some ways to fix it.

What’s Error Code 0x8007267C?

Error Code 0x8007267C has a connection to activation problems with Microsoft Windows and Office stuff. This error pops up when something’s wrong with the activation key or server, which stops the system from checking if the software is legit.

Why Error Code 0x8007267C Happens?

To fix this error , it helps to know what causes it:

Wrong Activation Key: The error code 0x8007267C might show up if you type the wrong key or make a mistake while setting things up. This can stop activation from working .

Problems with Activation Servers: Microsoft’s servers that check activation sometimes have issues. Your computer might not be able to verify if it’s activated when these servers are offline or being fixed.

Internet Problems: The activation process can go wrong and give you this error if your internet isn’t working right. Also, if your firewall is blocking stuff, it can cause trouble.

Broken System Files: Your computer has important files that help with activation. These can get messed up, which leads to Error Code 0x8007267C.

How to Fix Error Code 0x8007267C

To get rid of Error Code 0x8007267C, you gotta come up with a strategy to deal with the stuff we chatted about before. Here’s what you can do to find the issue and make it disappear:

Check your key:

Take a look at the activation key you entered during installation. Compare it to the one you got from Microsoft or the software seller. Type it in one more time to avoid any mix-ups with letters or numbers.

Check if activation servers are up:

Head to Microsoft’s website or browse support forums to see if the activation servers are acting up. If they’re having issues just hang tight until they sort things out before trying to activate again.

Look at your internet:

Make sure your computer has a good internet connection. If your network keeps dropping or if your firewall is stopping Microsoft’s servers, you won’t be able to activate your stuff.

Turn it off and on:

Sometimes just shutting down your computer and starting it up again can fix small issues that caused the error. After you restart, try to activate Windows again.

Use the built-in fixer:

Windows has tools inside it that can find and fix common activation problems on their own. To solve issues related to Error Code 0x8007267C, use the Activation Troubleshooter tool.

Fix System Files:

Think some system files are busted? You can run a tool in Command Prompt as an admin to check. It’s called system file checker. Just type “sfc /scannow” and hit enter. This tool has an impact on repairing damaged or missing system files that might be keeping Windows from activating.

Conclusion:

Finally, if you are still not able to resolve this Troubleshooting Error Code 0x8007267C We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Troubleshooting Error Code 0-1007(0) During Installation of office

Getting error codes when you’re trying to install programs can be a real pain when they mess up the whole thing. One error that folks sometimes run into is Error Code 0-1007(0). This guide wants to help you figure out what’s going on with this error and how to fix it.

What’s the deal with Error Code 0-1007(0)?

Error Code 0-1007(0) shows up when there are issues with installing or updating Microsoft software. This error can happen for a many of reasons such as:

Network Issues: Your internet might go haywire preventing the software from downloading or installing .

Corrupted Installation Files: When the files you’re trying to install are incomplete or have problems, this error can pop up.

Antivirus or Firewall Interference: Your security program might mistake the installation for a threat and stop it.

System Configuration: Some settings on your PC might clash with the installation leading to this error.

Fix this Installation Error Code 0-1007(0)

Try these below steps one at a time to figure out and fix this office installation Error Code 0-1007(0):

Step 1: Ensure to check the Internet Connection

Test if your internet is stable or not . A bad internet connection can mess up your downloads or make it hard to install stuff. Check out some other websites to see if your internet’s working okay.

Step 2: Turn Off Your Antivirus or Firewall for a Bit

Sometimes, antivirus programs or firewalls can get in the way when you’re trying to install new software
Turn off the before you attempting to install the software again. Don’t forget to turn them back on after you’re finished.

Step 3: Clear Your Browser Data

If you’re getting the software from the web, empty your browser’s storage and get rid of temp files. This helps make sure bad files don’t mess up the setup.

Step 4: Use a different browser or device

When you’re working on web setups, try to get the software with another browser or gadget. Sometimes, these issues can be linked to a specific browser and can mess up the download.

Step 5: Update Windows

Check if your system is up to date by updating Windows. Old files can cause big problems when you’re trying to install new programs.

Step 6: Shut down and restart your computer

Restarting your computer often fixes temporary setup issues.When your computer turns on again, give the software another shot.

Step 7: Download the setup files again

If you had problems getting the setup files earlier head back to the main website to grab them one more time. Just make sure you’re downloading the right version for your computer’s system.

Conclusion:

Finally, if you are still not able to resolve this Error Code 0-1007(0) Troubleshooting Microsoft Office Installation Error We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Troubleshooting Microsoft Office Installation Error Code 30033-77

Are you stuck with the Microsoft Office installation error code 30033-77? Don’t worry, you’re not the only one. This error pops up when something’s off with your system settings other software is getting in the way, or the Office files themselves are acting up.

Here’s how to fix error 30033-77:

Easy steps to solve this Office setup problem 30033-77:

1. Check if your computer can handle it:

Look at what your computer needs to run Microsoft Office. See if your Windows version works with it and if you have enough room on your hard drive to install Office.

2. Get Windows up to date:

Old Windows can sometimes mess up Office installs. To fix this, update Windows. This puts the newest fixes on your computer.

3. Switch off your Antivirus/Firewall:

Programs like antivirus or firewalls might block Office from installing. To install Office, switch off any antivirus or firewall software that’s not part of Windows. Remember to switch them back on after you finish.

4. Try the Office Uninstall Support Tool:

Microsoft has a tool to help you take Office off your computer. It’s called the “Office Uninstall Support Tool.” This tool cleans up any Office files left behind that might make installation tricky. You can get this tool from Microsoft’s website and use it.

5. Get rid of Office Installation Files:

The error 30033-77 can happen because of messed up installation files. Get rid of the temporary files these might fix the problem. Here’s what to do:

Enter Win + R button to open the Run box.
Type the %ProgramData% and hit Enter.
Find the Microsoft folder and delete it.

6. Look for the Conflicting Software :

Other programs on your computer old Office versions or clashing software, can make installation a headache. Get rid of any previous Office versions before you try to install the new one.

7. Use Office Repair Tool:

Office comes with a fix-it tool to help solve installation problems. Here’s how to use it:

Head to Control Panel > Programs > Programs and Features.
Look for your Office installation in the list and pick it.
Hit Change at the top of the window.
Select Repair and do what it tells you.

8. Check Internet Connection:

Make sure your internet is working well and stays connected while you’re installing Office. If your connection is bad or keeps cutting out, it might mess up the installation.

9. See if Installing in Safe Mode Helps:

Sometimes other programs running in the background can cause problems when you’re trying to install Office. To see if this fixes things, try installing Office in Safe Mode.

Conclusion:

Finally, if you are still not able to resolve this Error Code 30033-77 Troubleshooting Microsoft Office Installation Error Code 30033-77We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.

Fixing Error Code 30180-4 When Installing Office

Error code 30180-4 can be a irritating issue when you’re trying to install or set up Office on your computer. This error 30180-4 means something went wrong during setup/install often because of the internet issues, messed up install files, or problems with other programs. But don’t worry – if you tackle it step by step, you can solve this problem and get Office up and running efficently .

What does this Error Code 30180-4 Means?

When you see or pops up this error code 30180-4, it’s with a message saying Office couldn’t be installed. This might be because of network problems, damaged install files, or issues with your Office subscription. Here are some typical reasons why this error pops up:

Internet issues: You need good internet to set up Office. If your internet cuts out while you’re downloading or installing, you might see this error.
Messed Up Files: The files you need to install Office can get screwed up when you’re downloading them or for other reasons. This can make the installation fail.
Other Programs Getting in the Way: Some antivirus stuff or firewall settings can mess with Office when you’re trying to install it. This can cause the 30180-4 error code.

How to Fix Error Code 30180-4?

Try these things to solve the 30180-4 error code:

Make sure you’re connected to the internet:

Have a good internet connection when you’re installing Office. If you’re using Wi-Fi, try plugging in an ethernet cable instead. It’s more stable.

Turn off your computer and try again:

Often just turning your computer off and on can fix weird problems that stop Office from installing. After you restart, try to install Office one more time.

Turn off your antivirus or firewall for a bit:

For a short time turn off any antivirus or firewall you have that’s not from Windows. These programs can sometimes stop Office from installing. Once they’re off, try to install Office again.

Use the Office Installation Troubleshooter:

Microsoft offers an Office Installation Troubleshooter tool to fix Office setup problems. Get this tool and run it to see if it solves the error.

Get Rid of Old Office Programs:

If you’ve tried to install Office before and it didn’t work, bits of that setup might be causing trouble. Use Microsoft’s Office Uninstall Support Tool to wipe out all traces of old installs before you try to set it up again.

Look at Your Subscription:

Make sure your Office subscription hasn’t run out. Log in to your Microsoft account to check if it’s still good.

Get and Set Up/install Office from Office.com:

Instead of using an old installation file you’ve already downloaded, try to get the Office installer straight from Office.com. This makes sure you have the newest Office version and cuts down the risk of messed up installation files.

Conclusion:

Finally, if you are still not able to resolve this Error Code 30180-4. We recommend you to Chat with our experts. I am sure they will help you resolve this issue. If you like to see the procedure for support, to clarify, you may ask the Tech Available online.

Click here to visit our tech expert to clear your problem Chat with us for more Technical Support.